The heating sequence
When the thermostat calls for heat, the furnace runs a safety check, starts the draft inducer to clear the vent, then lights the burners with an igniter. A flame sensor confirms the flame is present; if it isn't, the gas valve closes. Once the heat exchanger warms up, the blower moves house air across it and out to your rooms.
Interactive diagram
Inside a gas furnace
Flame heats sealed metal; your air is warmed by the metal, never by the flame itself.
Tap or click a numbered marker to see what each part does, or watch the animated flow to follow the cycle.
What AFUE means
AFUE (Annual Fuel Utilization Efficiency) is the share of fuel that becomes usable heat. A 95% AFUE furnace turns about 95 cents of every gas dollar into heat in your home.
Why furnaces need a fall check
Austin furnaces can sit idle for months, so dust builds up on burners and flame sensors. A fall tune-up cleans those parts, checks gas connections for leaks, inspects the flue and confirms the flame sensor and igniter work before the first cold snap.
Signs your furnace needs attention
- Clicking with no flame, or the system shuts off right after starting
- A yellow or flickering flame instead of a steady blue one
- Unusual smells or noises when it starts
- Rooms that never warm up evenly
