The cooling loop, step by step
Your system has two halves. Indoors, a blower pushes warm house air across the evaporator coil, where cold refrigerant absorbs the heat. Outdoors, the compressor pressurizes that refrigerant and pumps it to the condenser coil, where the fan sends the heat out into the yard. The refrigerant then passes through a metering device, cools down again, and returns inside to repeat the loop.
The cooled air travels back through your supply ducts to each room, and return grilles pull air back to the system so the cycle can continue.
Interactive diagram
The central AC cooling loop
Heat moves out of the house, cold isn't 'made,' it's what's left behind.
Tap or click a numbered marker to see what each part does, or watch the animated flow to follow the cycle.
Why humidity matters in Central Texas
As air crosses the cold evaporator coil, moisture condenses on it and drains away through the condensate line. That is why a working AC also dries your air. When a system is oversized or short cycles, it shuts off before it can remove much moisture, and rooms feel clammy even at a low thermostat setting.
What keeps it running efficiently
Clean filters, clean coils, the correct refrigerant charge and healthy electrical parts (capacitors and contactors) do most of the work. Dirty coils and clogged filters make the compressor run longer to move the same heat. A seasonal tune-up checks these items before the summer peak.
Signs your AC needs attention
- Warm or weak air from the vents
- The system turns on and off in short bursts
- Water around the indoor unit
- Buzzing, grinding or clicking noises
- Energy bills climbing with no change in use
